APB DynaSonics - ProRack-Monitor M1016 - Monitor / Matrix Mixer with 16 Mono Mic / Line Input Channels and Passive Splitter System

Click to enlarge

Feature Overview:

• 16 Mono mic/line input channels, all with Spectra-quality microphone preamplifiers in a 10u (17.5" in x 19") package.
• Built in Passive microphone splitter system on rear panel with Pin 1 lift switches.
• Minimum phase shift circuitry and internal Mother /Daughter Board construction derived from the Spectra console design.
• 48 volt Phantom Power switch, Polarity Reverse switch, Mic/Line switch, Mic Pad switch on input channels.
• Variable frequency high-pass filters on all input channels with a 20Hz to 400Hz sweep range at 12dB per octave.
• Input channels feature fixed high and low frequency EQ bands and two mid-sweep EQ bands, with EQ On switch with LED, The EQ internal design is based upon Spectra circuitry.
• Two (2) Mono mixes switchable between a pre or post fader source and include XLR balanced outputs and pre AFL (solo) TRS insert points.
• Eight (8) Stereo mixes, each with rotary level control and pan fader. These outputs each have balanced XLR outputs, Line (bus) inputs with each pair routed through return faders associated with each stereo master output section and pre AFL (solo) TRS insert connectors. Output may be selected to mono operation by front panel switch, making use of only the left inset point feeding both left and right output connectors.
• Internally illuminated Mute and PFL/AFL switches along with 6-segment LED channel metering on all input channels.
• Eight sets of 10x2 segment output meters on each of the 8 Stereo Output master sections. Master output level is controlled from eight (8) 60mm stereo faders, with each of these output sections having internally illumined Mute and AFL switches. Bus level signal monitoring using bi-color LED's are provided on each stereo mix bus pair.
• Rear panel rotates and may be locked in any of three preset angles (referenced to the front panel) - 90 degrees, 135 degrees, or 180 degrees.
• 100-240 VAC, 50/60Hz Power Supply - Field replaceable (plug in) without disassembly of mixer.
• Adjustable lamp dimmer provided for the 4-Pin XLR connector for use with (optional) gooseneck lamp.