|
Optionally Powered
AF1A-R The AF1A-R is a portable wide range loudspeaker system
offering both high fidelity and high efficiency. The Time-Aligned
studio quality sound provides detail and clarity not found in other
designs. Rugged carpet covered poplar plywood with recessed handles,
casters, corners and our unique front grille cover make the AF1A-R an
ideal choice for portable sound reinforcement and musical instrument
applications.
About Time-Align® Time-Align® assures that the fundamental
and overtones of a complex, transient, acoustical signal are presented
to the listener in the same relationship as the electrical signal at
the input terminals of the loudspeaker.
The conventional loudspeaker spreads out the sound in time: when a
rapid series of transients occur the results are blurring and lost
detail. With Time-Align®, a transient is presented as a tight
package of energy, with the same time relationships as the natural
sound. This means that a rapid series of transients will be heard
clearly.
True Time-Alignment® requires much more than just physically
lining
up the loudspeaker components. It requires consideration of the driver
placement, driver delay and adjustment of the crossover delay
parameters. This achieves the precise simultaneous acoustical arrival
time of each driver throughout the crossover region.
Along with state-of-the-art laboratory instruments, the proprietary
Time-Align® generator, built by Ron Wickersham, is used in
designing our loudspeaker systems. The Time-Align® generator is
founded upon different underlying mathematical principles than are used
in the more common Fourier based measurement equipment.
When comparing a genuine BAG END Time-Aligned™ speaker system to any
other, our additional design work is easy to hear and appreciate. The
dramatic clarity, realism, and overall pleasant sound of our
Time-Aligned™ loudspeakers is noted throughout the world.
Applications:
- Auditorium Reinforcement
- Church Sound Reinforcement
- Home Theatre Systems
- Nightclub Applications
- Musical Instrument System
- Portable Sound Reinforcement
- Nightclub Applications
- Portable DJ Systems
- Drum Monitor
- Electronic Keyboards
Specifications:
System Components
|
Acoustic and
Electrical
|
Physical
|
|
Enclosure:
3/4" 7-ply poplar plywood
Low Frequency Transducer:
18" Cone
3" Voice coil
95 oz. Magnet
Mid Frequency Transducer:
12" Cone
2.5" Voice coil
80 oz. Magnet
High Frequency Transducer:
1" Exit compression driver
1.8" Titanium diaphragm
15 oz. Magnet
Radial horn
Input Connectors:
1 - Dual banana
2 - 1/4" Phone
2 - Neutrik Speakon
Grille:
16 Gauge black vinyl
coated perforated steel
Standard
Hardware:
8 - Recessed handles
8 - Interlocking corners
1 - Protective grille cover
2 - 3 1/2" Rigid casters
|
System Type:
3-way
Low section 5.5 cu. ft. vented
Mid section 1.0 cu. ft. sealed
Impedance:
4 Ohms
Crossover Network:
Passive Time-Align™ equalizer type
at 2.5 kHz and 125 Hz
Time Offset Between Drivers:
< ± 25 Microseconds
Frequency Response:
40 Hz to 20 kHz ±3 dB
(4pi Steradians)
Sensitivity:
101 dB SPL (1W @ 1m)
Dispersion:
80 degrees Horizontal (-6 dB)
60 degrees Vertical (-6 dB)
(Horn may be rotated 90 degrees for a
60 degrees H x 80 degrees V dispersion)
Power Handling:
300 W continuous sine wave
1200 W instantaneous peak
|
Finish:
Black carpet
Dimensions:
44"h x 22.5"w x 18.5"d
112 cm x 59 cm x 47 cm
Weight:
143 lbs.
65 kg
Shipping Dimensions:
20" x 45" x 25"
51 cm x 115 cm x 64 cm
Shipping Weight:
154 lbs.
70 kg |
Download Datasheet
PDF 472 kb
About Time-Align®
| 
