Brace Audio products are currently unavailable due to the disaster in Japan.
Finally, affordable Digital Wireless!
A breakthrough in wireless technology, the Brace DWG-1000 blows away
traditional analog wireless systems and gives you something cables
can’t: natural tone AND freedom to roam the stage or control room.
Frequency response of 10 Hz - 15 kHz delivers thunderous lows and
crystal-clear highs rivaling the mostPackage Contains expensive audio
cables without the static, jamming, and dropouts caused by cell phones,
wireless networks or dynamics-destroying companding found in analog
systems.
ALL Automatic Channel Selection and Locking transparently links the
transmitter to the receiver the moment the units are powered on.
Depending upon conditions, up to twelve DWG-1000 Digital Wireless
Systems can be used simultaneously onstage and up to six DWG1000-TX
transmitters can link to a single DWG-1000 receiver.
Operating at 2.4 GHz, The DWG-1000 includes a declaration of
conformity, so you’ll never worry about their wireless being confiscated when traveling internationally.
The Brace Audio DWG-1000 Digital Wireless System is remarkably
rugged and the only US-made, ultra-compact, multi-transmitter-capable
wireless system that delivers unprecedented, professional-level
performance and pristine audio quality for a great price.
- Plug and Play- “Zero Set Up”- just insert batteries, turn on, and play
- 10 Hz -15 kHz frequency response- great for guitar & bass!
- 100 foot plus range - Enough range for 99% of typical gigs
- 2.4G Hz Frequency Hopping Spread Spectrum (FHSS) transmission
- More than 65 thousand channels available
- Brace internal antennae is much more efficient at 2.4GHz than UHF or VHF
- Unlike UHF/VHF, the Brace 2.4GHz wireless is useable all over the world
- Does not use any companding (which may cause dynamic mistracking,
perceived roughness of the low frequency content, pumping and
breathing,” and other non-linear characteristics that result in
frequency response and signal distortion.), which is necessary on other
wireless systems to mask their noise floor
- Brace Audio’s unique internal dome antenna design helps immensely for drop out avoidance and no antenna breakage
- Rugged polycarbonate derivative casing is incredibly shock resistant.
- Multiple transmitters can be linked to a single receiver
- Automatically locks Transmitter to Receiver
- 8 – 12 units can be used simultaneously
- Will not have interference with Digital TV
- Low power indicator
- Runs on 2x AA batteries
- 24-bit DAC (Digital Audio Converter) running at 48kHz
- Certified for US, Canada & EU
- Easy press function button to change channels
- ALL Auto Channel Lock System
- Link LED
- Low Battery LED
Specifications:
Overall System:
Operating frequency Band: 2.4GHz ISM
Number of Unique Bonded Channels: 65,000 +
Signal-to-noise Ratio: > 100 dB SNR
Total Harmonic Distortion: < 2% (800 mVpp @ 1 kHz)
Frequency Response: 10 Hz to 15 kHz
Maximum input level: 1Vrms
Low Battery Alert: 15 minutes of life left
Antenna: Internal
Units operating at same time: 8 -12
Digital Audio Converter: 24-bit AKM running at 48kHz
Unity gain with Automatic gain matching
Certified for use in USA, Canada and the EU
DWG-1000 Transmitter:
RF Output Power: 16 dbm
Maximum Input Level: 2.75v peak to peak
THD: <2% @ 800 mV pp 1 kHz tone
S/N Ratio: more than 90 dB
Battery Life: 5 hours (2xAA size battery)
Output: 33mm, 1/8 in. mono Jack
System gain: 1
Frequency: 2.4 Ghz, FHSS
Input Impedance: 600K ohm
Operating Power Voltage: 3.0V Typical
Audio Frequency Response: 10 Hz - 15 kHz
Lower Battery Alert: 15 minutes of life left
Antenna: Internal dome
Units operating at same time: 8-12
Instrument Connector: 3.5 mm, 1/8 in. mono Jack
Dimensions: 3.5”x2.5”x1.25”
Net Weight: 4 oz
|
DWG-1000 Receiver:
Operating Power Voltage: 3.0V/500mA Typical
Frequency Type: 2.4 Ghz, FHSS
AC adapter jack: tip + polarity
Amplifier Connector: 3.5 mm, 1/8 in. mono Jack
Battery Life: 7 hours (2xAA size battery)
Dimensions: 3.5”x2.5”x1.25”
Net Weight: 4 oz
|
Package Contains
|
DWG-1000 System
|
DWG-1000 TX (Extra Transmitter)
|
|
(1) Transmitter
(1) Receiver
(2) belt pack clips
(1) Velcro strap
(2) 1/4" (6.3 mm) to 1/8" (3.5 mm) Guitar Cables
(1) power supply
(1) owners manual
(1) EU Declaration of Conformity
|
(1) Transmitter
(1) belt pack clip
(1) 1/4" (6.3 mm) to 1/8" (3.5 mm) Guitar Cable
(1) owners manual
(1) EU Declaration of Conformity
DWG-1000 TX specs match DWG-1000 System (Transmitter) specs.
|
DWG 1000-2T System (2 Transmitters)
Package the same as the DWG1000x but with
(2) Transmitters and
(2) Velcro straps.
| 
