|
The CharterOak Acoustic Devices S600 is a front address vacuum tube condenser microphone. Delivered in sequentially numbered pairs with a lockable fight case, dual power supply, and two shock mounts and is extremely well suited for stereo recording.
The S600, like all CharterOak products, features extremely rigid
construction and a clean and simple electronic design.
The CharterOak S600 uses a custom made side terminated 1.00" gold
sputtered Mylar capsule and custom made output transformer. Its rich
and particularly non-sibilant eq make it a perfect choice when used as
a stereo overhead pair on the drum kit. The result is clean and rich
cymbals with lots of sustain while picking up all of the transient
peaks of the snare and tom toms.
The extended bass frequency response of the S600 makes a single S600 a
perfect choice for recording bass guitar and its particularly smooth
treble response makes it a perfect choice for recording bright electric
guitars.
It is hard to imagine a more versatile tool in the studio than a pair
of CharterOak S600 vacuum tube condenser microphones.
The microphones are delivered with a lifetime warranty
on all parts and labor and easy access to factory technical
support.
| Specifications |
| Acoustical
Operating Principle |
Pressure Gradient |
| Diaphragm |
Single 1.00"
6 micron thick gold sputtered Mylar (side terminated) |
| Frequency
Response |
18Hz-20kHz |
| Sensitivity |
13mV/Pa 0dB=1V/Pa@1kHz |
| Polar
Pattern |
Cardioid |
| Impedance |
< 200 Ohms |
| Recommended
Load |
>
200 Ohms |
| Equivalent
Input Noise |
22dB A weighted
IEC651 |
| Maximum
Sound Pressure Level |
125dB for
0.5% total harmonic distortion @ 1000Hz |
| Power
Requirements |
Custom supply
115V or 230V operation with IEC type 2 AC Cable |
Connection
between
Mic & Power Supply |
7 pin XLR |
For more information, click here | 
