|
At the heart of the DriveRack® system is the 480. The 480
includes 4 inputs and 8 outputs which can be tailored for any
configuration. By including every form of processing necessary to drive
the signal from the mixer to the power amps, such as pre-crossover EQ,
notch filters, speaker delay, multiple crossovers, speaker compensation
equalizer, driver alignment delay, and compression/limiting, the 480 is
truly the only box you’ll need for any sound system application. Two
real time analyzers can be run simultaneously with RTA source inputs
capable of being remotely switched on the fly. The 480 is fully
programmable from the front panel, with the 480R remote control, or
through a computer via the GUI port.
Features
- 4 Inputs and Outputs with routing
- 31 band graphic or 9 band parametric equalizer on every input (pre-crossover)
- Dual Real Time Audio Analyzers
- Butterworth, Bessel or Linkwitz-Riley crossover filters
- 27 Different Crossover Configurations
- Time Alignment and Transducer Alignment Delays
- Compressor/Limiter on every output
- Speaker Compensation EQ (post crossover)
- Multi-level Security System
- Separate House and Show EQ with individual lockout
- Triple redundant back up of all parameters when running network, 480R and PC GUI
- TYPE IV™ Conversion System
- Electronically balanced/RF filtered XLR Inputs and Outputs
- Proprietary RS-485 Control Network
- RS-232 PC Interface for computer display and configuration
Specifications
Owner's Manual [17megs - DriveRack family]
Cut Sheet [140K]
Accessories:
480-M
DB9 Nul-Modem Cable
CBC Cable
DriveWare GUI v2.5
RS-232 Adapters | 
