|
Matches with Mini OWL and PINK tv Active 4 x 80 W
EMES's multi-purpose AMBER active sub units can be used as a classic
mono sub woofer, or they can be combined with our near-fields
(physically matched with PINK tv active, GREEN tv active and
Mini OWL-System) to extend their power handling and low end
frequency response. (Refer to EMES MODU-MO)
On the removable 2 x 160W active electronics, we integrate inputs
and outputs for left/center/right channel, by-pass remote function,
phase control (0 - 360 degrees within 12 steps of 30 degrees)
level control and filter functions (80/150 Hz. On/Off).
Drivers:
LF= 10 inch dual coil, long excursion
FC response: 38 - 2.000 Hz (±2.0 dB 38 - 200 Hz)
Sensitivity: 91 dB 1W/1m at 0.5% THD
Sensitivity max: 115 dB
Power handling rms: 2 x 140W active
Power handling peak: 2 x 160W active
Dimension: 290 x 420 x 350mm (11.5" x 16.5" x 12")
Weight 23.6 Kg (52lbs.)
Special: High pass (80/150 Hz), 3 IN/Out, 4x4 dip-switches for
level, phase-control
Listening distance: 100cm - 400cm. (3.5 - 13ft.)
Applications
- RECORDING
- PROJECT
STUDIO
- FILM/VIDEO
Editing
- MASTERING
- SOUND-Design
extends
fc- responce and acoustic output of our 2 way systems.
used as .1 channel in 5.1 SURROUND SOUND systems
| System |
AMBER |
| Construction |
bass-reflex |
| Concept |
long
excursion woofer - active |
| fc
response free field |
42
- 2,000 Hz +/- 8 dB |
| fc
reponse filtered |
42
- 80/150 Hz +/- 1.5 dB |
| system
low fc response |
39
Hz - 3 dB |
| max.
sensitivity |
111
dB |
| max.
sensitivity long term |
108
dB |
| harmonic
distortion at SPL <100Hz |
0.8
% |
| harmonic
distortion at SPL >100Hz |
0.4
% |
| Bass
driver |
1
x 10" Paper/Fiberglas |
| Midrange driver |
- |
| Hf
driver |
- |
| shielded
(anti magnetic) |
- |
| weight |
52
lbs |
| dimensions
w/h/d in mm |
11.5"
X 16.5" X 12" |
| pair
difference |
- |
| Electronic |
AMBER |
| number
of amplifier |
4 |
| power
handling rms Lf/Hf |
4X80
W |
| power
handling peak Lf/Hf |
4X90
W |
| connector
type |
3
XLR (female)/ 3 XLR (male) |
| input
impedance |
10
kOhm |
| input
sensitivity |
16
steps, from 0.45 - 4.5V |
| X-over
fc |
off/80/150
Hz |
| low
pass filter |
15
Hz/-18dB |
| polarity
control |
2
steps, in phase - out of phase |
| phase
control |
5
steps, from 30 - 150 degree |
| distortion
at acoustic max. output |
0.1% |
| signal
to noise ration |
-100
dB |
| kind
of power supply |
analog |
| operating
voltage |
115/230
V +/- 20% |
| power
consumtion at max. output |
360
W |
| 
