|
Matches OWL HR, VIOLETT HR, BLACK tv HR and BLUE HR, 4 x 80 Watts
The AMBER HR active is identical to the AMBER active except the
larger cabinet size which physically matches with the BLACK
tv HR active, VIOLETT HR active, BLUE HR active and OWL-System.
Due to the larger cabinet dimensions, the AMBER HR active has
a 6 Hz lower system frequency.
Both AMBERS reach a very low -3dB point, because we use a 10-inch
dual coil driver which is capable of moving its membrane by
±15mm.
Drivers:
LF= 10 inch dual coil, long excursion
FC response: 32 - 2.000 Hz (±2.0 dB 32 - 200 Hz)
Applications
- RECORDING
- PROJECT
STUDIO
- FILM/VIDEO
Editing
- MASTERING
- SOUND-Design
extends
fc- responce and acoustic output of our 2 way systems.
used as .1 channel in 5.1 SURROUND SOUND systems
| System |
|
| Construction |
bass-reflex |
| Concept |
long
excursion woofer - active |
| fc
response free field |
38
- 2,000 Hz +/- 8 dB |
| fc
reponse filtered |
38
- 80/150 Hz +/- 1.5 dB |
| system
low fc response |
36
Hz - 3 dB |
| max.
sensitivity |
112
dB |
| max.
sensitivity long term |
109
dB |
| harmonic
distortion at SPL <100Hz |
0.8
% |
| harmonic
distortion at SPL >100Hz |
0.4
% |
| Bass
driver |
1
x 10" Paper/Fiberglas |
| Midrange
driver |
- |
| Hf
driver |
- |
| shielded
(anti magnetic) |
- |
| weight |
63
lbs |
| dimensions
w/h/d in mm |
15"
X 19" X 13.75" |
| pair
difference |
- |
| Electronic |
|
| number
of amplifier |
4 |
| power
handling rms Lf/Hf |
4X80
W |
| power
handling peak Lf/Hf |
4X90
W |
| connector
type |
3
XLR (female)/ 3 XLR (male) |
| input
impedance |
10
kOhm |
| input
sensitivity |
16
steps, from 0.45 - 4.5V |
| X-over
fc |
off/80/150
Hz |
| low
pass filter |
15
Hz/-18dB |
| polarity
control |
2
steps, in phase - out of phase |
| phase
control |
5
steps, from 30 - 150 degree |
| distortion
at acoustic max. output |
0.1% |
| signal
to noise ration |
-100
dB |
| kind
of power supply |
analog |
| operating
voltage |
115/230
V +/- 20% |
| power
consumtion at max. output |
360
W |
| 
