|
The top model of the EMES standard 2 way monitor line is the
BLUE HR active.
Many Mastering & Recording studios have already chosen the
BLUE HR to work with. With the BLUE HR you get a mix that is
"compatible" with a wide range of reproduction situations.
When a precise and natural sonic image is needed, the BLUE HR
active is the only choice. In combination with the AMBER HR
active sub unit, you can achieve a powerful 3-way main monitoring
system suitable for any control room up to 40m (131 ft.) All
components on the BLUE HR active are carefully chosen and matched
to guarantee a max pair difference of 0.5dB.
Drivers:
LF= 2x18cm carbon, HF= 28mm silk dome
FC response: 37 - 20.000 Hz (±2.0 dB)
Sensitivity: 90 dB 1W/1m at 0.3% THD
Sensitivity max: 116 dB
Power handling rms: 3 x 100W LF/HF
Power handling peak: 3 x 120W LF/HF
Applications
- RECORDING
- BROADCAST
- FILM/VIDEO
Editing
- MASTERING
- SOUND-Design
as STEREO (L/R) and
SURROUND SOUND system (L/C/R)
| System |
|
| Construction |
2
way bass-reflex |
| Concept |
D'Appolito Monitor
with Wave-guide |
| fc
response free field |
38
- 20,000 Hz +/- 1.5 dB |
| fc
reponse in wall |
38
- 20,000 Hz +/- 1.5 dB |
| system
low fc response |
36
Hz - 3 dB |
| max.
sensitivity |
110
dB |
| max.
sensitivity long term |
107
dB |
| harmonic
distortion at SPL <100Hz |
0.8
% |
| harmonic
distortion at SPL >100Hz |
0.4
% |
| Bass
driver |
2
x 8" carbon paper |
| Midrange
driver |
- |
| Hf
driver |
25mm
Silk Dome |
| shielded
(anti magnetic) |
- |
| weight |
40
lbs |
| dimensions
w/h/d in mm |
19"
X 10" X 12" |
| pair
difference |
+/-0.5
dB |
| Electronic |
|
| number
of amplifier |
3 |
| power
handling rms Lf/Hf |
3X100
W |
| power
handling peak Lf/Hf |
3X120
W |
| connector
type |
XLR
(female) |
| input
impedance |
10
kOhm |
| input
sensitivity |
16
steps, from 0.45 - 4.5V |
| X-over
fc |
1,200
Hz |
| low
pass filter |
35
Hz/-18dB |
| Hf
level control |
16
steps, from -4dB - +4 dB |
| Lf
gain control |
16
steps, from -6 dB - + 4 dB |
| distortion
at acoustic max. output |
0.1% |
| signal
to noise ration |
-100
dB |
| kind
of power supply |
analog |
| operating
voltage |
115/230
V +/- 20% |
| power
consumtion at max. output |
300
W |
| 
