|
The Yellow HR is a passive sub woofer with two 15 inch long
excursion drivers.
The drivers are electrically and acoustically separated from
each other (isolated cavities) so you can drive them independently
in mono or in stereo.
The
top and bottom dimensions are identical to the CYAN HR, allowing
the user to build an aligned main monitoring system capable
of handling an enormous amount of acoustic output.
Drivers: LF= 2 x 15 inch, paper membrane
FC response: 38 - 1.000 Hz (±2 dB)
Sensitivity: 93 dB 1W/1m at 0.5 % THD
Sensitivity max: 120 dB
Power handling rms: 2 x 200W active
Power handling peak: 2 x 400W active
Dimension: 680 x 800 x 400mm (26.75" x 31.5" x 15.75")
Weight 38.9 Kg (85lbs.)
Special: Stereo / dual Mono Mode
Listening distance: 200cm - 500cm. (6.5 - 16ft.)
Applications
- RECORDING
- BROADCAST
- FILM/VIDEO
Editing
- MASTERING
- SOUND-Design
as
STEREO (L/R) and
5.1 SURROUND SOUND system
| System |
YELLOW
HR active/passive |
| Construction |
bass-reflex |
| Concept |
double 15" Woofer
|
| fc
response free field |
38
- 1000 Hz +/- 2 dB |
| fc
reponse in wall |
38
- 400 Hz +/- 1.5 dB |
| system
low fc response |
36
Hz - 3 dB |
| max.
sensitivity |
115
dB |
| max.
sensitivity long term |
112
dB |
| harmonic
distortion at SPL <100Hz |
1.5
% |
| harmonic
distortion at SPL >100Hz |
1
% |
| Bass
driver |
2
x 15" paper |
| Midrange
driver |
- |
| Hf
driver |
- |
| shielded
(anti magnetic) |
- |
| weight |
85
lbs |
| dimensions
w/h/d in mm |
26.75"
X 31.5" X 15.75" |
| pair
difference |
- |
| Electronic |
YELLOW
HR |
| number
of amplifier |
4 |
| power
handling rms Lf/Hf |
(2X250
passive) 2X160 W |
| power
handling peak Lf/Hf |
(2X400
passive) 2X200 W |
| connector
type |
XLR
(female) |
| input
impedance |
10
kOhm |
| input
sensitivity |
16
steps, from 0.45 - 4.5V |
| X-over
fc |
off / 80 / 150 Hz |
| low
pass filter |
10
Hz/-18dB |
| polarity
control |
2
steps, in phase - out of phase |
| phase
control |
5
steps, from 30 - 150 degree |
| distortion
at acoustic max. output |
0.1% |
| signal
to noise ration |
-100
dB |
| kind
of power supply |
digital |
| operating
voltage |
115/230
V +/- 20% |
| power
consumtion at max. output |
400
W |
|