|
|
|
Fat Pro - FADB-1 - Single Channel Active Direct Box |
|
|
| Find a Product Quickly - click below to select from a list of all products for this brand | | |
|
FADB-1: Single-channel active direct box with instrument, line,
speaker level input selector, high Z unbalanced input and output
connectors, and balanced output connector, all gold plated. The only
direct box made that operates on 9 v battery, 48 v phantom power, and 120 vac. Typical battery life is approximately 400 hours. Includes
battery on flashing indicator. 3-year warranty.
- Flat Response, +0dB/-.2dB from 20 Hz to 20KHz.
- Exceptionally Low Noise, -126dB Ein, Signal to Noise -110dB.
- Low Distortion, less than .004 %
- 2.2 Meg ohm Input Impedance guarantees Full Response and Maximum Sustain from all types of pickups.
- No Transformers, transformers have input impedance's of 50K W's
or lower, this causes less drive, distorted bass, hi-end roll-off and
loss of sustain of instrument pickups.
- Wide Dynamic Range, handles up to 5.6v P-P in Instrument Position
with 9v battery and 10 v rms when using 120 vac or 48 v phantom power.
- RF Protection on Input and Output
- Operates on 120 vac, 9v Battery and 48v Phantom Power
- Switchable Ground Isolation, unique circuitry keeps entire box
grounded to mixer or amplifier main ground, only input ground is lifted.
- On/Off Switch turns off 9v battery, disconnecting the input will also turn off the power.
- Flashing Power On led lets you know when you forget to turn it off.
- Long Battery Life, typically 600 hours from one 9V battery.
- Three Position Input Switch Guarantees Maximum Signal to Noise.
- Designed And Packaged To Be Indestructible
- All Markings On Top of Unit
- Full Three Year Warranty
Specifications
Frequency Response +0/-.02dB 20Hz-20kHz
Bandwidth +0/-3 dB 2Hz-200kHz
Noise 20Hz/20KHz -116 dB
Distortion 20Hz-20KHz 0.005 %
Maximum Input Instrument 2.3V RMS/+7.2dBv
Maximum Input Line 12V RMS/+21.6dBv
Maximum Input Speaker 120V RMS/+41.6dBv
Gain Instrument -15 dBv
Gain Line -30 dBv
Gain Speaker -50 dBv
Input Impedence (Instrument) 2 MEG ohms
Input Impedence Line / Speaker 22,000 ohms
Input Connectors 1/4" Phone jack
Output Load Impedance
Bal. -- P2 to P3 = 600 ohms
Unbal. -- P2 or P3 to P1= 300 ohms
Output Connector 3 Pin XLR
Output Phase Pin 2 Pos./Pin 3 Neg./ Pin 1 Gnd.
Channels One
Height 1.73" Width 5.1" Depth 3.4"
Weight 1 Lb
Power Requirements
9V Battery 5 ma/200 hrs. typ.
48V Phantom 5 ma/240 mW
120 vac 1.4 ma/186 mW
|
|
|
| Sunday 14 December, 2008 |
|
|
|
|
| Shopping Cart |
 |
 | 0 items |
|
|
|
|
|
 |
| We accept Visa, Mastercard, Discover, American Express, Bank Transfer Payments, Checks and Money Orders. |

|
|
|
| Specials |
 |
|
|
|