pre outs, inserts & expandable channels

You are here:

Find a Product Quickly - click below to select from a list of all products for this brand

Fat Pro Technologies - FMLM42 - 4 x 2 Mic / Instrument / Line Level Stereo Mixer w/ pre outs, inserts & expandable channels

The FMLM42 is a high quality 4 channel Mic / Instrument / Line Mixer offering low distortion and extremely low noise. Each channel has a 2 position input switch for Microphone / Instrument / line level inputs. This along with the input gain control and clip led guarantee ultimate flexibility and maximum signal to noise. With both XLR and 1/4” TRS on all inputs and outputs. Mic inputs have switchable 48v phantom. A unique bussing system allows multiple mixers to be summed, 4, 8, 12, 16 channels, etc. Anytime a simple but versitle Mic / Instrument / Line Mixer is called for FMILM-42 is an excellant choice. Housed in an indestructible metal chassis using only the finest audiophile-quality components. All this in a small rackmountable 1/2 rack space.

Flat Response, +0dB/-.01dBv from 20 Hz to 20KHz.
Exceptionally Low Noise, -102dBv.
Low Distortion, less than .0025 %
Crosstalk, -115 dBv.
Wide Dynamic Range, handles up to +9v RMS, +18 dBv, (Line Level), 0.5v RMS, -6 dBv, (Mic level).
Clip Indicator on each Channel.
Gain & Pan Control on each Channel.
Insert & Pre-out each channel.
Right and Left, (Stereo), Output Level Controls.
Switchable +48V Phantom opower..
Mic / Instrument / Line Input Selector Switch on each Channel.
XLR and 1/4” TRS Jacks on all Inputs And Outputs.
Bussing allows paralelling multiple mixers. 4, 8, 12, 16 channels etc.
Designed And Packaged To Be Indestructible.
Includes 24 vac Power Supply.
Single and dual rack mount kits are available.
Full Three Year Warranty
Homegrown and Designed in california, U.S.A.

Specifications:

Frequency Response: +0/.01 dBV 20Hz-20kHz
Bandwidth: +0/-.3 dBV 3Hz-80kHz
Signal to Noise: +4 dBv OUT -92 dBv
Distortion: 0.02% 20Hz-20kHz
Crosstalk: -105 dBv
Maximum Input MIC: 0.90V RMS, / -9
Maximum Input INSTRUMENT: 7.5V RMS /
Maximum Input LINE: 41V RMS/+32 dBv
Maximum Gain: +50 dB
Input Impedence MIC: 6OO ohms
Input Impedence INSTRUMENT: 2 MEG ohms
Input Impedence LINE: 10K ohms
Input Connectors: 3 Pin XLR, / 1/4" (T, R, S)
Output Load Impedance:
Bal. --P2 to P3 = 600 ohms
Unbal. --P2 or P3 to P1= 300 ohms
maximum Output: +20dBv dBv
Output Connector: 3 Pin XLR. / 1/4" (T, R, S)
Output Phase XLR: Pin 2 Pos./Pin 3 Neg./ Pin 1 Gnd.
Output Phase 1/4: Tip Pos./Ring Neg./ Sleeve Gnd.
Channels: FOUR
Height: 1.73"
Width: 8.5"
Depth: 3.4"
Weight: 2 Lbs.
Power Requirements: 120 vac 6 ma/.096 watts