The aggregate wire size is two 8 awg conductors. The tonal balance of
12TC is full, rich and powerful while the musical impact and dynamics
reveal three-dimensionality and imaging. Although you may notice
increased low end performance, the midrange and high frequencies
are clear and detailed exhibiting coherency and realism.
Basic Electrical Specifications
DUT: 12TC 2.5m bare wire ends.
|(Cp) parallel capacitance:
||1.4 nF @ 20 kHz
|(Ls) series inductance:
||0.32 µH @ 20 kHz
|(Rdc) dc resistance:
|(Xt) total reactance:
||0.04 Ω @ 20 kHz
|Frequency response ±0.5 db
||dc - 500 kHz
The following precision test instruments have been used to measure the above specifications and are owned and operated in-house by KIMBER KABLE: HP 4194A Impedance / Gain Phase Analyzer, HP 4284A Precision LCR Meter, HP 4395A network / Spectrum Analyzer.
For more information and pictures, click on the connector model below.
||Bare wire is part of the prep charge.
||Standard 1/4" spade lugs.
||Single banana plugs (4mm).
||PostMaster barrier strip 1/4"
||PostMaster standard 1/4" spade
||PostMaster oversized 5/16" spade
||WBT CE compliant angled banana plugs (4mm).
||WBT nextgen CE angled banana plugs (4mm).
||WBT 1/4" (6mm) copper sandwich spades.
||WBT 5/16" (8mm) copper sandwich spades.
You may select one type of connector for the amplifier end of
the cables and another type of connector for the speaker end of
Prices below are for Stereo Pairs (2 cables for 2 speakers).
Single cables for subwoofers and center speakers are available on request for half the price of a Stereo Pair.