Setting the Standard
In 1979 this classic design put
KIMBER KABLE on the map and after improvements over time, is still
considered the reference for affordable loudspeaker cables. Millions of
feet of this remarkable cable have been sold. The construction consists
of four brown and four black conductors that utilize KIMBER's proven
braiding technique. The aggregate wire size is two 14 awg conductors.
Even the most basic systems, old and new, will benefit significantly
from this legendary performer. When demonstrating KIMBER KABLE to a new
dealer, this cable is used with the most modest system available. With
4PR, the system performs as if costing twice as much. Bass and treble
frequencies are allowed their full extension, while dynamics emerge
unrestrained. The 4PR is also an excellent cable for professional and
studio use due to its inherent ability to reject noise in any cable
|DUT: 4PR 2.5m bare wire ends.
|• (Cp) parallel capacitance:
||312.0 pF @ 20 kHz
|• (Ls) series inductance:
||0.654 µH @ 20 kHz
|• (Rdc) dc loop resistance:
|• (Xt) total reactance:
||0.0825 Ohms @ 20 kHz
|• Frequency response ± 0.5 dB
||dc - 100 kHz|
Cables are available with different connectors on each end. For example, banana plugs to spade lugs.
||Bare wire ends (no extra change).
||Standard 1/4" spade lugs.
||Single banana plugs (4mm).
||PostMaster barrier strip 1/4"
||PostMaster standard 1/4" spade
||PostMaster oversized 5/16" spade
You may select one type of connector for the amplifier end of
the cables and another type of connector for the speaker end of
Prices below are for Stereo Pairs (2 cables for 2 speakers).
Single cables for subwoofers and center speakers are available on request for half the price of a Stereo Pair.