MIPRO - AD-707a - UHF Antenna Divider System/Active Antenna Multi-Coupler for ACT-7 Series (482-698MHz)

Click to enlarge

UHF Antenna Divider System/Active Antenna Multi-Coupler (for up to 4 diversity receivers) for ACT-7 Series (482-698MHz) Includes 2FA004 Antenna Cables.

• Optimized for 470~800MHz carrier frequency range and compatible with US and EU telecom regulations.
• A single AD-707a supports up to four UHF diversity receivers from just a pair of antennas, greatly reducing antenna installations clutter and increasing receiving range and efficiency.
• Adopts the latest high dynamic range and low noise component, advanced circuit design featuring very low inter-modulation distortion and eliminates the spurious interference in multiple system usage. System output gain equals to approximately 1.
• 2 sets of antenna input/output connectors and 2 sets of 4-channel antenna output connectors for directly connecting to 4 sets of diversity receivers. The antenna input connector can be fitted with whip antenna or coaxial antenna of appropriate frequency band. Besides, through optional booster, it also can be linked to ground plane antenna or UHF wideband log antenna.
• The output connectors can be linked to the input connectors of another antenna divider for extended antenna distribution.
• The input connectors provide DC bias for the antenna boosters or active directional antennas.
• Booster power indicator to detect the linkage of booster.

Specifications:

• Antenna Splitter: 2 sets of 1-to-4 active divider output, 2 sets of 1-to-1 active divider output.
• Filter Frequency Band: 470~800MHz
• Third Order Interception: +32dBm, antenna input signal
• Gain of RF Output: +1.0dB±1dB
• Gain of Input/Output: +1.0dB±1dB
• Output Port Isolation: >18dB at 400~1000MHz
• Filter Selection: Low sideband >=35dB, High sideband >=30dB
• Impedance: 50ohms
• Connector: TNC female
• Power Supply of Antenna Input: Antenna A/B input port supplies bias 8.3V DC, 230mA max. to the booster.
• Power Supply: 12~15V DC
• Current Drain: Approx. 190mA at 12V DC
• Dimensions:
  
• 482 W x 44 H x 190 D mm
  
• 19.0 W x 1.7 H x 7.5 D "
• Weight: Approx.
  
• 1.5kg
  
• 3.3lbs
• Note: Refer to actual product in the event of product discrepancy.