- Combination 3-way broadband corner trap
- High-density fiberglass panel with resonator membrane
- Easy to assemble 24" x 48" flat pack wood frame
- Effective from 65Hz and up
The MaxTrap is a great looking 24" x 48" broadband acoustical absorber
designed specifically for use in corners to provide all important bass
frequency control while simultaneously reducing mid and high frequency
reflections. It is well documented that wall and ceiling planes tend to
reflect and guide bass energy into corners. With this knowledge,
acousticians almost always look at situating bass traps in corner
joints where walls intersect.
Working like a 3-way speaker
in reverse, the MaxTrap employs three acoustic principles in one
device: High frequencies are absorbed with a fabric covered 3" thick
high-density fiberglass panel. Behind the panel is a 16" deep open air
space to reduce low-mid and bass frequencies. Deep bass down to 65Hz is
absorbed by a heavy, dead mass in the form of a diaphragmatic membrane.
Powerful bass frequencies set the membrane into motion, converting
sound energy into heat.
With MaxTraps mounted in your room,
you will immediately enjoy tighter, more accurate bass, reduced flutter
echo, and help eliminate troublesome standing waves that cause peaks
and nulls. The listening "sweet spot" will enlarge and your recordings
will better translate as you play them back in different rooms and
audio playback systems.
Shipped flat in kit form to save
freight, the MaxTrap features an easy to assemble black laminated wood
frame. Assembly and installation will typically take less than 30
minutes per unit using regular household tools. The MaxTrap may be
ordered in a choice of black, grey or beige panel fabric to suit most
color schemes. For those with artist flare, a second fabric covering
may be added without affecting the MaxTrap's performance.
For more information, click here | 
