Radial - Tonebone Headbone TS - Guitar Amplifier Head Switcher Pedal for 1 tube to 1 solid-state amp. PSU included

Click to enlarge

• Switches two heads using one speaker cabinet
• Choice of direct or buffered input
• Digital micro-controlled relays for failsafe switching
• Slingshot™ remote-controlled switching input
• Models for tube amps (VT), solid-state (SS) or both (TS)
  

The Radial Headbone is an advanced 'head switching device' that allows two different guitar amplifier heads to be used with a single speaker cabinet. With Headbone, one head could be used for rhythm while a second head could be used for soloing. With 100% discreet class-A circuitry and choice of either buffered or un-buffered inputs, the Headbone will be of particular interest for players that demand the utmost in tonal performance.

The Headbone's internal switching comprises a sequence of relays, photocells, and load resistors, all of which are controlled via a digitally programmed chip. Hit the footswitch and the Headbone toggles the guitar signal from one amp to the other, disconnects the speaker and diverts the signal to a load resister, reconnects the speaker to the second head and turns on the guitar, all in quick succession. The Headbone features SafeModeT whereby even when power is disconnected; the Headbone will automatically default to a 'head-1 to cabinet' status, ensuring a constant load on the amplifier.

To eliminate running guitar and speaker cables to-and-from the amplifier and the pedal board, the Headbone is equipped with SlingshotT, an easy to use remote control system that employs a standard foot switch to toggle the Headbone's status from a remote pedal board.

The Headbone is available in 3 models: The VT for two valve-tube heads; the SS for two solid-state heads; and the TS for Tube to solid state switching. Headbone. another Radial 'power tool' for serious guitarists.

For more information: