Put More PUNCH Into Your Mixes!
You're doing a mix down and you started with the rhythm section. Having finished that, you mix in a few more tracks. Then you notice that the kick drum and the bass guitar seem to be fading out. The levels were fine when you finished the rhythm section mix and they still sound fine if you solo the tracks. So, you raise the levels on the kick and the bass and add some more tracks. Once again, you need to bring up the levels on the kick and the bass. Worse yet, the kick, the bass and all the low frequency tracks are losing their punch, especially during the crescendos.
The problem is current starvation.
Most mixing consoles are underpowered.
The typical stock power supply provides enough current if you're just running a few channels. But if you're running lots of tracks and lots of low frequency program, the channels don't get enough current and transient peeks are "cut off".
R.A.L.'s Custom Manufactured Console Power Supplies fulfill all your console's power needs per original specifications. But, they also provide extra "head room" to allow all channels to run at idle at all times, whether you're running a few channels, or all forty-eight.
- Solid steel rack mount chassis
- Detachable AC power cable
- Detachable console power cable
We custom manufacture power supplies for select brands of consoles including:
For more information and pricing, contact us with the make and model of your console.