|
The
Rane ME 60 is a 2-channel, 1/3-octave constant-Q micrographic
equalizer. The ME 60 utilizes compact 20 mm sliders. Two adjustable
band-limiting filters add to each channels' versatility. The Low Cut
filter has a range from 10 Hz to 250 Hz, and the High Cut filter sweeps
from 3 kHz to 40 kHz, rolling off unwanted frequencies at both ends of
the spectrum.
The active filter sections feature Rane's
innovative constant-Q (constant bandwidth) design. This means the
bandwidth of each individual filter is guaranteed to be narrow enough
to prevent unwarranted interaction between filters, yet wide enough to
produce exactly the type of correction curve demanded by even the most
unusual acoustic surroundings. This differs dramatically from
conventional designs of the past, encumbered with the unfortunate
characteristic of changing bandwidth when changing boost/cut amounts.
Front
panel controls and indicators, aside from the sliders, include an
overall Level control for each channel as well as Overload indicators
and passive Bypass switches. The rear of the unit provides 1/4"
Tip-Ring-Sleeve phone, RCA phono, and XLR connectors for each of the
Inputs and Outputs. The Inputs and Outputs are fully actively balanced
(except the RCA's). Unbalanced sources may be connected through the use
of either mono 1/4" TS connectors or by tying the ring to the sleeve on
1/4" TRS plugs.
Data Sheet (200k)
| Manual (200k)
| Schematics (400k)
| 
